GoCalm™

GoCalm™ is safe for adults and children aged 6 and above. It uses the same gentle acupressure principles that have been central to Traditional Chinese Medicine for thousands of years — with no medication, no chemicals, and no side effects.

We recommend consulting with your doctor prior to use if:

• You have any serious medical conditions, for example, if you have an implanted medical device such as a pacemaker, heart disease, or you suffer from seizures.
• You are pregnant.
• You are over the age of 70.

The effectiveness of the GoCalm™ device may vary from person to person, depending on individual health, wellbeing, and lifestyle factors. Results are not guaranteed, and the devices should not be considered a substitute for medical treatment.

Please consult with a healthcare professional if you have any concerns or pre-existing medical conditions before use.

To get the best results from your GoCalm™ device, follow these simple steps: 

Step 1: Charge the GoCalm™

Ensure the device is charged before use. A USB charge cable is provided in the box which plugs in to the charge port at the bottom of the device. A full charge is reached in just 30 minutes. Do not overcharge the device as this can damage the battery and reduce battery life.

Step 2: Turn on the GoCalm™ 

Turn on the device by pressing the power button for 5 seconds. The device will start up on the lowest frequency setting and a light will illuminate.

Step 3: Hold the GoCalm™ in  your palm

Place your left hand through the cord and then hold the device in the palm of your left hand with the ball point positioned on the PC8 acupressure point (located where the tip of your middle finger touches your palm when you make a fist) – refer to image below to locate this point. It is very important that the device is positioned correctly for optimal results.

Close your hand to secure the device in your palm. 

Step 4: Adjust the power

Adjust the power up (+) or down (-) to a level which is comfortable. Select from 5 power modes, from ultra-low frequency to high frequency for personalised comfort. If you can’t feel the pulsing sensation on your palm immediately, increase the power by pressing the (+) button several times and re-position the ball point as needed to find the correct point. You should feel gentle pulses being transmitted through your palm.

The device automatically turns off after 20 minutes. If you wish to turn off the device manually, press the power button for 5 seconds.

We encourage you to use the device for at least two weeks to experience the full benefits.

For anxiety or stress: Use for 20 minutes, up to 3 times per day — morning, afternoon, and evening. You can also use it in the moment whenever anxiety or stress strikes, such as before a difficult meeting, during a commute, or when you feel overwhelmed.

For sleep: Use for 20 minutes just before bedtime as part of your wind-down routine. Most customers find they fall asleep before the 20-minute timer is even up.

For children with ADHD or difficulty settling: Use for 20 minutes before bedtime to help your child wind down naturally. You can also use it during moments of heightened activity or distress during the day. GoCalm™ is safe for children aged 6 and above.

It is perfectly safe to use GoCalm™ as often as you need it throughout the day.

A single charge can last up to 15 hours, depending on the power setting selected.

If you can’t feel the pulsing sensation in your palm immediately, increase the power by pressing the (+) button several times and re-position the ball point as needed to find the correct point. Adjust the power up (+) or down (-) to a level which is comfortable.

If you have dry hands, this can also reduce the effects of the microcurrent pulses. To increase conductivity of the microcurrents, it helps to moisturise your hands before use.

Troubleshooting:

To test that the device is working and not faulty, place your index finger on the round ballpoint in the centre while simultaneously touching the other part of the metal body with your middle finger. If you can feel the microcurrent pulses running through your finger, your device is working correctly.